Bbk-performance 17800 Manuel d'utilisateur télécharger pdf

INS 122

1996-2004 4.6L 2-V Mustang Throttle Intake

Part# 1780

Included In This Kit-

Throttle Intake (4) mounting screws (2) PCV fittings EGR& IAC gaskets

(2) TPS screws TPS bushing (2) throttle cable bracket mounting bolts.

Tools Required-

¼” Drive Ratchet 6" Extension 4 &6mm Allen wrenches

8mm & 10mm Deep Sockets Phillips Screwdriver

Step 1

Disconnect negative (–) battery terminal and remove the

intake air hose to the throttle body.

Step 2

Remove the 2 EGR tube bolts on the driver’s side of the

plenum.

Step 3

Remove the throttle cable bracket bolts and disconnect the

Throttle and cruise control cables from the throttle body.

Step 4

Disconnect the electrical and vacuum connections that attach

to the plenum and throttle body.

Step 5

Remove the 5 mounting bolts that attach the plenum to the manifold and remove the throttle

body/plenum assembly from the vehicle.

Step 6

Determine the PCV fitting your application requires and install into the plenum.

Note;

Install the PCV fitting before installing the IAC valve.

‘96-‘01 = small PCV fitting. ‘02-‘04 =large PCV fitting.

Step 7

Install the IAC valve using the supplied gasket and original bolts.

Step 8

Place TPS bushing over the TPS shaft and install TPS using the supplied screws.

Step 9

Inspect the plenum to lower manifold gasket, be sure to wipe any debris from the mating

surfaces then install the throttle body/plenum assembly onto the intake manifold using the

supplied bolts.

Note;

For this installation you will only use 4 of the 5 mounting holes on the intake manifold.

Step 10

Re-establish the electrical and vacuum connections.

Step 11

Attach the throttle and cruise control cables to the Throttle Intake and attach the bracket to

the Throttle Intake using the supplied bolts.

Step 12

Reconnect the EGR tube using the supplied gasket and original bolts.

Step 13

Reconnect the intake air hose and the negative battery terminal.

Part# 1780 1

Résumé du contenu

Page 1 - Part# 1780

INS 122 1996-2004 4.6L 2-V Mustang Throttle Intake Part# 1780 Included In This Kit- Throttle Intake (4) mounting screws

Modèles reliés 1780

Commentaires sur ces manuels

Pas de commentaire

Bbk-performance 17800 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la voiture Bbk-performance 17800. BBK Performance 17800 User Manual [en] Manuel d'utilisatio

Résumé du contenu

Modèles reliés 1780

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la voiture Bbk-performance 17800