Bbk-performance 1598 Manuel d'utilisateur télécharger pdf

Performance Underdrive Pulley Kit

Part #1598

INS-075

Step 1 Raise hood and disconnect negative (–) battery terminal.

Step 2 Leave serpentine belt in place and loosen the crankshaft pulley and waterpump pulley bolts.

Step 3 Using an air impact wrench, loosen and remove the alternator pulley nut. Applying additional tension to the belt

will aid in keeping the alternator from spinning.

Step 4 Remove belt, carefully noting the routing for reinstallation once pulleys are installed.

Step 5 Remove pulleys from vehicle and simply reverse the process to install the BBK pulleys. Install all of the pulleys

finger-tight, then install the belt to tension pulleys while tightening to factory torque specs.

Step 6 Carefully follow the belt routing to ensure that the belt is tracking properly. It is very easy to incorrectly install the

belt with one groove off a pulley—this would destroy the belt immediately!

Step 7 Reinstall negative (–) battery terminal and start vehicle. Watch belt carefully to ensure proper alignment, etc..

INSTALLATION INSTRUCTIONS

www.BBKPERFORMANCE.com

IMPORTANT—All appropriate safety equipment (e.i., gloves, tools) must be used during the installation of this product(s).

BBK Performance, Inc. accepts no responsibility for injuries resulting in the installation of any product(s).

Part #1598 1

Résumé du contenu

Page 1 - Part #1598

Performance Underdrive Pulley KitPart #1598INS-075Step 1 Raise hood and disconnect negative (–) battery terminal.Step 2 Leave serpentine belt in place

Commentaires sur ces manuels

Pas de commentaire

Bbk-performance 1598 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la voiture Bbk-performance 1598. BBK Performance 1598 User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la voiture Bbk-performance 1598